Kiwi Deans In
Kiwi Pass Through Regulator deans input
The Kiwi pass through regulator is a regulator that is designed specifically
for helicopter use. The Kiwi can be thought of both a regulator and a
Power Buss type unit. Designed for use with any battery with a Voltage
under 10 volts. It is recommended that a battery no higher than 8.4
be used with the Kiwi due to its designed purpose. Before you
purchase a Kiwi it is strongly recommended by Fromeco that you read Fromeco's
Kiwi PDF document found here. Kiwi PDF You will need Adobe Acrobat 6.0 or higher to
view this document.
The Kiwi is designed to help pilots squeeze every last inch out of
performance from there servos at higher voltages. It is also the
perfect unit to allow for the unregulated Cyclic control voltages using a
LiFePO4 battery pack such as the Iron Corps, and Iron Corps Extreme A123.
Kiwi at a glance
- Kiwi Regulator
- Deans input
- 4 Ports, usable at either Raw Battery Voltage, or Regulated at 5 volts
- 5 Male/Male JR jumpers for connection to RX, 1 jumper for Switch
- Switch not included must be purchased separately,
Turn Kiwi into Switch
- Designed for use on batteries 8.4 volt and lower, Please read Kiwi PDF, for warnings and clarification on unit
installation
